Automatic Driver Installation
Connect your Android device to the PC using a good quality USB cable. Once the application is downloaded, just extract the zip and install the executable package.
If your BitScope seems to be slow to respond reduce the driver latency. If BitScope DSO reports SYDNEY check the selected COM port is correct. If BitScope DSO reports OFFLINE check the selected COM port is correct.
Depending on your computer’s settings, you will likely need administrator priviliges to perform this one-time installation. Connect your device to other USB ports on your PC.
Temporarily disconnect any other USB Serial devices from your PC. Be sure to download and use the latest versions of BitScope Software. Windows may throw up a roadblock when trying to view the COM port or adjust the device properties when accessed the more direct way.
To optimize performance in Windows we recommend reducing the driver latency. Expand Universal Serial Bus devices. Four ULINKplus devices should display.
Note that COM3 is reported at the bottom of the application. If the selected COM Port does not appear here, you are not connected to your BitScope . Use Windows Device Manager if Windows prevents you accessing devices.
- I’ve downloaded USB driver from ST and it is working fine now.
- Installing it via Device Manager and overriding the complaint of an unsigned driver does the trick.
- Install fails via the automatic installer; that one-line fix breaks driver signing.
- However, PS/2 gtx 1050 drivers as a connectivity standard is near dead , with fewer motherboards supporting it, and it falls to USB as a backup.
In the Search field type in the name of the location where you saved the extracted file, then selectBrowse. You can also simply select Browse and navigate to the location where you saved the extracted file. Click here to download the Cricut Drivers .zip file. If it’s slow to connect make sure the correct COM port is listed first.